F9-How to setup the black and white list


This article will guide you how to setup a black and white list and the steps as below
Model Number: F9       Question Classification: Speed Control
说明: C:\Users\Administrator\Desktop\截图02.png
 The computer can connect to the router via the Internet connection, it can be connected wirelessly to the router if it is a laptop.
Wired Connection:
说明: C:\Users\Administrator\Desktop\微信图片_20170612154121.png
 
Wireless Connection:

说明: C:\Users\Administrator\Desktop\截图03.png


说明: C:\Users\Administrator\Desktop\截图04.png
 
Open a browser then type //tendawifi.com into the Address Bar and then press Enter. Typing login password in the homepage of router then click “Login”.
 
说明: C:\Users\Administrator\Desktop\截图09.png
Set the blacklist: the device on the blacklist cannot connect to the F9 wireless signal. The other equipment is normal
 
Method 1: open "Bandwidth Control", can make the screen setting for the online device. The diagram below, click on the corresponding equipment behind the "Internet Access" column switch button, close to the current equipment shielding, then click "ok" to save.
说明: C:\Users\Administrator\Desktop\截图10.png
 
Method 2: open the "Advance" - "MAC Address Filter", choose the blacklist, then connect to ban WIFI device's MAC address to fill in in, click "+", click "Ok", and to save.
说明: C:\Users\Administrator\Desktop\截图11.png
 
If you need to remove a device from the blacklist, two methods:
 
Method 1: remove restriction from "Bandwidth Control" - "blacklist list" and click "Ok";
说明: C:\Users\Administrator\Desktop\截图12.png
 
Method 2: In" Advance "-" blacklist list "and click" Ok "to save.
说明: C:\Users\Administrator\Desktop\截图13.png
 
White list: no other device can connect to the wireless signal except for the white list
 
You can add all current online devices, or manually add the device's MAC address.
说明: C:\Users\Administrator\Desktop\截图14.png
 

Was this article helpful to you?

Very Good(4)Article Views(1697)