TES7001&02V1.0 Firmware Upgrade Guide-V3.0.0.47

Applicable Products: TES7001 & TES7002

Hardware Version: V1.0

Main Control Version: V3.0.0.47 PON Version: 0.0.2.122 / 0.0.3.36

Precautions

1. This firmware is applicable to TES7001 and TES7002.

2. Log in to the OLT web interface with a computer, and refer to the TES7001 or TES7002 software upgrade video for the upgrade steps.

3. Both the main control and PON software need to be upgraded, with no sequence requirement. Each only needs to be upgraded once, and the device can be restarted after all upgrades are completed.

4. Clear the browser cache in advance before logging into the WEB after the version update.

5. Special attention is required for upgrading from Main Control V1.0.0.XX: Due to configuration incompatibility in cross-version upgrades, do not restart the device after software upgrade. The device needs to be restored to factory settings. The OLT requires reconfiguration after startup. After applying the OLT configuration template, de-authorize the online ONTs to obtain the new configuration template. Please plan the upgrade time properly.

Update Notes

1. Optimized the CLI architecture (structure and keywords)

2. Added support for mixed ONTs

3. Added support for OLT loop detection function

4. Added support for configuration of GEMPORT, ONT port VLAN (including template PON port binsding), TR069, and FEC templates

5. Optimized the VLAN module and WEB interface

6. Optimized the uplink port module on WEB interface, and added uplink port performance statistics

7. Optimized the PON port module on WEB interface, added PON port performance statistics and batch configuration switches for PON port enable, isolation and FEC

8. Optimized the ONT authorization list on WEB interface, added functions of ONT active/deactive, TR069, WAN (standard OMCI), ONT port MAC address table reading, MAC limit and loopback

9. Added ONT auto-discovery function: ONTs being registered can be found in the WEB unauthorized list, and manual ONT registration and authorization are supported

10. Added alarm view on WEB interface: supports classification of alarm records by alarm type, configuration of alarm thresholds for PON port optical module parameters, and alarms for ONT port linkdown and port loopback

11. Added support for modifying the WEB HTTP port number

12. Fixed the extremely low-probability issue of ONT batch offline

13. Fixed the unstable registration issue of individual ONT types

14. Fixed some known issues