FH456-How to setup Bandwidth Control


Note: This article will guide you how to setup speed control and the steps as below.
 
Step 1: Connect your computer to the LAN port .Power on the FH456.
You can also use your smartphone to configure the router.
Step 2: Open a Web Browser -> Input //tendawifi.com or 192.168.0.1 in the address bar -> Press Enter
Step 3: Go to Bandwidth Control and choose the device you want to control. Set the speed of upload limit and download limit, then click “OK” to save all the settings.


Was this article helpful to you?

Very Good(0)Article Views(381)