How to reset&reboot on G5328P-24-410W

1.When a parameter you set does not work properly, you can try to reboot the switch to fix this issue.

2.Click Device Settings > Maintenance > Maintenance to enter the page. On this page, you can click Reboot to restart the switch。

Note：Please click on the upper right corner to save all settings before rebooting the switch

If you forget your username or password when you log in the web UI of the switch, you can restore the factory settings of the switch, and then use the default username and password (both are admin) to log in. This switch supports Software reset and Hardware reset.

1. Click Device Settings > Maintenance > Maintenance to enter the page. On this page, you can click Reset to restore the switch to factory settings, and all configuration information will be removed.

Note：During the resetting process, please ensure the stable power supply to the switch

Hardware reset ：

When the Power LED indicator is solid on, and the SYS LED indicator is blinking, press and hold the reset button (LED Mode or LED/Reset) for about 10 seconds, and then release it when all indicators are solid on. When the Power LED indicator is solid on, and the SYS LED indicator blinks again, the switch is restored to factory settings