TES7008V2.0 Software Upgrade Guide V1.0

 

Software Version：V2.2.0.24     

Hardware Version: V2.0

Upgrade Notes:

1.This firmware is only fit for TES7008V2.0.

2.Login to the OLT web using PC and upgrade the firmware versions Refer to TES7001 or 02 videos.

3.Do not power off the device when upgrading.

4.After the version update, you need to clear the browser cache in advance before logging in to the WEB interface.

Release Notes:

1.Fixed some known issues.

2.Optimized the VLAN module and WEB interface.

3.Optimized the uplink port module on the WEB interface, and added uplink port performance statistics.

4.Optimized the PON port module on the WEB interface, and added PON port performance statistics, PON port enable/disable, isolation, and FEC bulk configuration switch.

5.Added the OLT loopback detection function.

6.Optimized the ONT authorization list on the WEB interface, and added ONT active/deactive, TR069, WAN (standard OMCI), ONT port MAC address table, MAC limit, and loopback functions.

7.Added the ONT auto-discovery function. The unregistered list on the WEB interface can now discover ONTs in the registration process, and supports manual registration and authorization of ONTs.

8.Added GEMPORT, ONT port VLAN, TR069, and FEC template configurations.

9.Added alarm view on the WEB interface. It supports alarm records categorized by alarm type, configuration of alarm thresholds for PON port optical module parameters, and ONT port linkdown and loopback alarms.

10.Supported modification of the WEB HTTP port number.

11.Resolved the issue of probabilistic ONT registration failure after rebooting the OLT.

12.Resolved the issue of probabilistic ONT DBA configuration failure during large-scale ONT migration.