O3 v2.0-How to setup AP mode

Note: This article will guide you how to setup AP mode and the steps as below. In this mode, the device creates a wireless network based on the current wired network.

Step 1: Connect the computer to the device
1.1 Open the plastic cover of O3.
1.2 Connect the PoE LAN/WAN port to the PoE injector.
1.3 Power on the O3, the LAN/WAN LED indicator of the O3 lights up.
1.4 Connect your computer to the LAN port of the PoE injector.
Step 2: Enter management interface of O3
2.1 Open a Web Browser -> Input in the address bar -> Press Enter
2.2 Type the default username and password (admin for both defaults) and click “Login”.
Step 3: Select AP Mode
3.1 Click “Quick setup”, select “AP”.
3.2 Modify custom local wireless network parameters and click “Next”.
3.3 Click “Save”.
The Current Mode is AP Mode.

Was this article helpful to you?

Very Good(4)Article Views(1306)