TEG1128P-24-250W  26GE+2SFP Ethernet Switch With 24-Port PoE

26GE+2SFP Ethernet Switch With 24-Port PoE

Network standardsIEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/ IEEE 802.3af/IEEE 802.3at
LED IndicatorPower
Interfaces(26)1GE RJ45 ports
(2)1GE SFP ports
Transmission mediaRecommended: CAT5/5e UTP or better
Level of protectionPort: 6 KV
Power:6 KV
Forwarding modeStore-and-forward
Switch capacity56Gbps
Packet forwarding rate41.7Mpps
MAC address table8K
PoE budgetSingle port: AF: 15.4W, AT: 30W
Whole device: 230W
Power consumption250W
Input voltage100-240V AC,50 / 60Hz
MountingRack mounting : support
Desktop mounting: support
Wall mounting: support
EnvironmentOperating Temperature: 0℃~45℃
Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
CertificationFCC, CE, RoHS
FuntionsOne-key to change network mode:
1.Standard: All ports can communicate with each other. It can be used as a common non-management PoE switch.
2.Priority: Ports 1 to 8 are high-priority ports, which greatly reduce packet loss and congestion when the network is congested.
3.Extend: The maximum transmission distance of the 17-24 ports of the switch can reach 250 meters, and all ports can communicate with each other.
4.VLAN: Ports 1 to 24 cannot communicate with each other, but can communicate with ports 25, 26, SFP1 (27), and SFP2 (28), which can be used to isolate broadcast storms and DHCP conflicts.