TES7001&02V1.0 Firmware Upgrade_V3.0.0.39
Applicable products:TES7001&TES7002
Hardware Version: V1.0
OLT version：V3.0.0.39 PON version：0.0.2.107/0.0.3.36
Upgrade Notes:
1. This firmware is applicable to TES7001 and TES7002.
2. Log in to the OLT web interface using a computer. For the software upgrade procedure, refer to the TES7001 or TES7002 Software Upgrade Video.
3. Both the main control software and PON software require upgrading; there is no specific sequence, and each only needs to be upgraded once. Clear the browser cache in advance before logging into the WEB interface after the version update.
4. Special attention is required for the upgrade of Main Control V1.0.0.XX: device configuration is incompatible and reconfiguration is necessary. Please arrange sufficient time for the upgrade process.
Release Notes:
1. CLI architecture (structure and keywords) optimized.
2. Support for mixed ONTs.
3. Support for OLT loop detection function.
4. Support for configuration of GEMPORT, ONT port VLAN (including template-based PON port binding), TR069 and FEC templates.
5. VLAN module and Web UI optimized.
6. Uplink port module Web UI optimized; uplink port performance statistics added.
7. PON port module Web UI optimized; PON port performance statistics added, together with batch configuration switches for PON port enable, isolation and FEC.
8. ONT authorization list Web UI optimized; functions including ONT active/deactive, TR069, WAN (standard OMCI), ONT port MAC address table reading, MAC limit and loopback added.
9. ONT auto-discovery function added: ONTs in registration status can be detected in the Web UI unauthorization list, supporting manual ONT registration and authorization.
10. Alarm view added to Web UI, supporting alarm record classification by alarm type, configuration of alarm thresholds for PON port optical module parameters, and alarms for ONT port link down and port loopback.
11. Support for modification of Web HTTP port number.
12. Fixed the issue of extremely low-probability batch ONT offline.
13. Fixed the registration instability issue of individual ONT types.
14. Fixed some known issues.
Applicable products:TES7001&TES7002
Hardware Version: V1.0
OLT version：V3.0.0.39 PON version：0.0.2.107/0.0.3.36
Upgrade Notes:
1. This firmware is applicable to TES7001 and TES7002.
2. Log in to the OLT web interface using a computer. For the software upgrade procedure, refer to the TES7001 or TES7002 Software Upgrade Video.
3. Both the main control software and PON software require upgrading; there is no specific sequence, and each only needs to be upgraded once. Clear the browser cache in advance before logging into the WEB interface after the version update.
4. Special attention is required for the upgrade of Main Control V1.0.0.XX: device configuration is incompatible and reconfiguration is necessary. Please arrange sufficient time for the upgrade process.
Release Notes:
1. CLI architecture (structure and keywords) optimized.
2. Support for mixed ONTs.
3. Support for OLT loop detection function.
4. Support for configuration of GEMPORT, ONT port VLAN (including template-based PON port binding), TR069 and FEC templates.
5. VLAN module and Web UI optimized.
6. Uplink port module Web UI optimized; uplink port performance statistics added.
7. PON port module Web UI optimized; PON port performance statistics added, together with batch configuration switches for PON port enable, isolation and FEC.
8. ONT authorization list Web UI optimized; functions including ONT active/deactive, TR069, WAN (standard OMCI), ONT port MAC address table reading, MAC limit and loopback added.
9. ONT auto-discovery function added: ONTs in registration status can be detected in the Web UI unauthorization list, supporting manual ONT registration and authorization.
10. Alarm view added to Web UI, supporting alarm record classification by alarm type, configuration of alarm thresholds for PON port optical module parameters, and alarms for ONT port link down and port loopback.
11. Support for modification of Web HTTP port number.
12. Fixed the issue of extremely low-probability batch ONT offline.
13. Fixed the registration instability issue of individual ONT types.
14. Fixed some known issues.