產品圖
TEG1120P-16-250W
Hardware
Network standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
LED Indicator
Power
Link/Act
PoE MAX
Interfaces
(18)1GE RJ45 ports
(2)1GE SFP ports
Transmission media
Recommended: CAT5/5e UTP or better
Fan quantity
1
Dimension
440mm*178mm*44mm
Level of protection
Port: 6 KV
Power:6 KV
Forwarding mode
Store-and-forward
Switch capacity
40Gbps
Packet forwarding rate
29.8Mpps
Buffer
4Mb
MAC address table
8K
Jumbo frame
PoE budget
Single port: AF: 15.4W, AT: 30W
Whole device: 230W
Power consumption
250W
Input voltage
100-240V AC,50 / 60Hz
Mounting
Rack mounting : support
Desktop mounting: support
Wall mounting: support
Environment
Operating Temperature: 0℃~45℃
Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Certification
FCC, CE, RoHS
Software
Funtions
One-key to change network mode:
1.Standard: All ports can communicate with each other. It can be used as a common non-management PoE switch.
2.Priority: Ports 1 to 8 are high-priority ports, which greatly reduce packet loss and congestion when the network is congested.
3.Extend: The maximum transmission distance of the 9-16 ports of the switch can reach 250 meters, and all ports can communicate with each other.
4.VLAN: Ports 1 to 16 cannot communicate with each other, but can communicate with ports 17, 18, SFP1 (19), and SFP2 (20), which can be used to isolate broadcast storms and DHCP conflicts.