O2 Firmware V1.0.0.11(4763)_EN


Upgrade Notes:

1.  This firmware is only fit for O2v1.0 and its firmware version must be in V1.0.0.XX or more.

2.  Do not power off the device when upgrading.

3.  Please unzip the file you downloaded and use the file ended with "bin" or "trx" to upgrade your device.

4.  Please reset it to factory settings after upgraded it.

Release Notes:

1.  Solved the issue that CPE will hang and reboot while enable or disable TDMA in Management Software when point-to-point connection.

2.  Solved the issue that STA will hang and reboot when point to point connection and AP side bandwidth is 10MHz.

3.  Solved the issue that AP side will show all STA online even one of STA powered off.

4.  Solved the issue that when 10*O2 connect to B6, all STA show online on B6 but PC connected to B6 cannot ping two of STA.

5.  Solved the issue that it cannot save when configure special bandwidth in CPE Management Software.

Herhangi bir sorunuz varsa, lütfen bize ulaşın.,thanks!