Tenda
  • Homepage (EN)
  • Rețelistică pentru locuințe
    • Sisteme mesh
    • Routere Wi-Fi
    • Routere 5G/4G cu Wi-Fi
    • Switch-uri, extendere Wi-Fi și Powerline
    • Adaptoare Wi-Fi pe PCIe și USB
  • Rețelistică pentru afaceri
    • Switch-uri și accesorii
    • Routere multi-WAN
    • Echipamente fibră optică
    • Puncte de acces Wi-Fi
    • Echipamente Wi-Fi pentru distanțe mari
    • Tenda CloudFi
  • Supraveghere video
    • Camere IP
    • NVR-uri
    • Kituri supraveghere video
  • De unde să cumpărați
    • eMAG România
    • Altex România
  • Centrul de asistență
    • Suport tehnic
    • Reprezentanțe și suport tehnic regional
    • Toate echipamentele și serviciile oferite
    • Specificații tehnice
    • Ghiduri de instalare rapidă
    • Descărcări
    • Întrebări frecvente
    • Materiale video de instruire
    • Emulatoare interfață gestionare
    • Produse scoase din producție (EOL)
  • Profil companie
    • Profil companie
    • Contactați-ne
    • Știri
  • Alegeți limba
Tenda

ro

Romania / Română /  ro
Romania-Română Argentina-Español Australia-English Bolivia-Español Brazil-Português Bulgaria-Български език Central America and Caribbean-Español Chile-Español China-简体中文 Colombia-Español Czech-English Denmark-English Ecuador-Español Egypt-English France-Français Germany-Deutsch Global-English Greece-Ελλάδα Hongkong,China-繁體中文 India-English Iraq-English Italia-Italiano Kenya-English Mexico-Español Nordic-English Norge-English Peru-Español Poland-Polski Portugal-português Russia-Русский Saudi Arabia-English South Africa-English Spain-español Suomi-English Sverige-English Taiwan,China-繁體中文 Thailand-ไทย Turkey-Türkçe Ukraine-українська United Arab Emirates-English United States-English Uruguay-Español Uzbekistan-Русский Venezuela-Español Vietnam-Tiếng Việt Nam
  • Rețelistică pentru locuințe

    Toate echipamentele și serviciile oferite

    Rețelistică pentru locuințe

    De unde să cumpărați

    Ghiduri de instalare rapidă

    Specificații tehnice

    Sisteme mesh

    Sisteme mesh dedicate, pentru acoperirea întregii locuințe, cu multiple funcții dar și cu gestionare din aplicația Tenda WiFi

    • Nou
    • Mesh Wi-Fi 6 sau 6E
    • Wi-Fi 5 Mesh

    Routere Wi-Fi

    Routere Wi-Fi individuale cu mai multe moduri de lucru și funcții, cu sau fără interconectare mesh, cu sau fără gestionare din Tenda WiFi APP

    • Nou
    • Routere Wi-Fi 7
    • Routere Wi-Fi 6 sau 6E
    • Wi-Fi 5 Routers
    • Wi-Fi 4 Routers

    Routere 5G/4G cu Wi-Fi

    Routere Wi-Fi, portabile sau nu, cu conectivitate 5G, 4G, 3G cu failover sau nu

    • Routere 5G cu Wi-Fi
    • Routere 4G cu Wi-Fi
    • Routere portabile 4G Wi-Fi (MiFi)
    • Routere ADSL2+ Wi-Fi

    Switch-uri, extendere Wi-Fi și Powerline

    Echipamente practice și compacte de extindere a rețelei prin cablu Ethernet, Wi-Fi sau prin rețeaua electrică

    • Switch-uri compacte fără management
    • Adaptoare Powerline
    • Extendere Wi-Fi

    Adaptoare Wi-Fi pe PCIe și USB

    Adaptoare, plăci de rețea pentru conectarea calculatoarelor la rețea prin Wi-Fi, dar unele și cu Bluetooth

    • Adaptoare Wi-Fi pe PCIe
    • Adaptoare Wi-Fi pe USB
  • Rețelistică pentru afaceri

    Toate echipamentele și serviciile oferite

    Rețelistică pentru afaceri

    De unde să cumpărați

    Ghiduri de instalare rapidă

    Specificații tehnice

    Switch-uri și accesorii

    Echipamente și accesorii pentru acces la rețea prin cablu Ethernet și fibră optică

    • Nou
    • Smart Switches
    • Switch-uri cu management
    • Switch-uri fără management
    • Switch-uri PoE cu sau fără management
    • Switch-uri cu management cloud
    • Media convertoare
    • Injectoare PoE și module SFP

    Routere multi-WAN

    Gateway sau echipamente de rutare cu multiple funcționalități avansate destinate în principal mediului de afaceri

    • Routere multi-WAN Wi-Fi
    • Routere multi-WAN cu control de AP-uri

    Echipamente fibră optică

    Echipamente dedicate pentru acces și distribuirea traficului prin fibră optică, inclusiv routere ONT cu Wi-Fi

    • Echipamente OLT
    • ONT
    • ONU
    • Module SFP dedicate GPON OLT

    Puncte de acces Wi-Fi

    Puncte de acces Wi-Fi (AP-uri) și controlere de puncte de acces (AC-uri)

    • AP-uri de tavan
    • AP-uri desktop
    • AP-uri de perete
    • AP-uri de exterior
    • Controlere de AP-uri

    Echipamente Wi-Fi pentru distanțe mari

    Accesorii și echipamente Wi-Fi multifuncționale de comunicare direcțională pe distanțe mari și foarte mari, P2P, P2MP, WISP etc

    • CPE-uri de exterior
    • Antene
    • Stații de bază Wi-Fi

    Tenda CloudFi

    Sistemul logic de gestionare unificată gratuită din cloud pentru echipamentele Tenda

    • Platforma web Tenda CloudFi
    • Aplicația Tenda CloudFi
  • Supraveghere video

    Toate echipamentele și serviciile oferite

    Supraveghere video

    De unde să cumpărați

    Ghiduri de instalare rapidă

    Specificații tehnice

    Camere IP

    Camere supraveghere ce pot funcționa individual sau conectate la NVR-uri, cu stocare locală sau în cloud

    • Nou
    • Camere IP pentru locuințe
    • Camere IP pentru afaceri

    NVR-uri

    Network Video Recordere independente, fără camere IP incluse, cu conectarea oricăror camere care suportă ONVIF

    • PoE & Non-PoE

    Kituri supraveghere video

    Kituri care includ camerele IP, NVR-ul și accesoriile, cu conectare automată și configurare facilă

    • Kituri supraveghere video Wi-Fi
    • Kituri supraveghere video PoE
  • Centrul de asistență

    Toate echipamentele și serviciile oferite

    De unde să cumpărați

    Ghiduri de instalare rapidă

    Specificații tehnice

    Descărcări

     

    • Fișe tehnice
    • Software
    • Firmware
    • Ghiduri de instalare
    • Manuale
    • Imagini echipamente
    • Drivere
    • Declarații CE
    • Declarații GPL

    Întrebări frecvente

     

    • QA
    • Features&Configuration
    • Troubleshooting
    • Others

    Centrul de asistență

     

    • Reprezentanțe și suport tehnic regional
    • Toate echipamentele și serviciile oferite
    • Descărcări
    • Întrebări frecvente
    • Materiale video de instruire
    • Emulatoare interfață gestionare
    • Ghiduri de instalare rapidă
    • Produse scoase din producție (EOL)

    De unde să cumpărați

     

    • eMAG România
    • Altex România

    Politici de utilizare și confidențialitate

     

    • Privacy Statement
    • Discontinuation Policy
  • Parteneri
    • TE3L
    • RE3L
    • CH7-WCA
    • RH7-WCA
    • TC3T24C
    • TC3B24C
    • TN3104-4P
    • TN3108-8P
    • TN3108
    • TN3116
  •   
    •   QA
    •   Features&Configuration
    •   Troubleshooting
    •   Others

Trouble shooting on Internet connection problems

 2013-08-29   160801

Acest articol se aplică la:

Troubleshooting on Internet connection problem

Internet connection problems may be caused by different factors, like the IP conflict between the Tenda router and the Internet upstream device, the registered MAC address, the MTU value, the DNS server, etc. This article is aimed at troubleshooting Internet connectivity issues about Tenda routers.

Note: Before proceeding with the solutions in this article, ensure that your Internet connection is active by plugging the Internet cable, which may come from your modem, directly into your computer.

Part 1: Connect the devices together

Part 2: Log into the web-based setup page

Part 3: Check the connection status in the setup page

Part 4: Troubleshooting Internet connectivity issues when the connection status shows Disconnected

Part 5: Troubleshooting Internet connectivity issues when the connection status shows Connecting

Part 6: Troubleshooting Internet connectivity issues when the connection status shows Connected


 

Connect the devices together

Here we recommend you connect your device to Tenda device by a wired connection.

Step 1:

Take an Ethernet cable to connect your computer with one of the yellow LAN ports of the Tenda device.

Step 2:

Ensure that the light corresponding to the LAN port where the Ethernet cable is connected to is lit. If it is lit, you may proceed with the next procedure. Otherwise, try to connect your computer to another yellow LAN port or change another Ethernet cable.

Note: There is only one LAN or LAN/WAN port on some devices like A5/A6/A3/A30/N3/3G150B/PW201A, etc. You can only log into the setup page wirelessly for A5 and 3G186R.

Log into the Tenda web-based setup page

Find out the login IP address on the label located on the back of the Tenda device, and then enter it in the address bar of a web browser. Enter the login username and password if prompted, generally admin both for username and password. If you changed the login IP address or password, you should login with the new IP address and password.

You may need to refer to the User Guide for help about logging into the setup page. For troubleshooting on logging into the setup page, click here.

Note: For A5 and 3G186R, you can only log into the setup page wirelessly.

Check the connection status in setup page

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select System Status/Status/Device Info from the main menu.

Note: You may find System Status in the submenu of Advanced Settings.

Step 3:

Locate Network Status/WAN Status/WAN, and you will find the Connection Status/Status there.

Normally, we have 3 connection status: Disconnected/Connecting/Connected. When it says Disconnected, proceed with Part 4; Connecting, Part 5; Connected, Part 6.

Troubleshooting Internet connectivity issues when the connection status shows Disconnected

You can try the following solutions one by one:

Check the hardware connection

Change the WAN speed in the setup page

Reset the Tenda device to factory default

l  Check the hardware connection

Simply plug the Internet cable, which may come from your modem, securely into the blue WAN port. You should hear a click. In rare cases the Internet cable could be faulty and cause network connectivity issue. Try using any other Ethernet cable in place of the faulty one comes from your modem or contact your ISP (Internet Service Provider) for help.

l  Change the WAN speed in the setup page

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select Advanced Settings again and then select WAN Speed or select WAN Speed directly, and change the WAN speed to be 10M Full-duplex or 10M Half-duplex.

Note:

i. For dual band router like N60, you should select Network first, then select WAN Port, and then point to Speed/Duplex. Change the WAN Interface-Speed/Duplex to be 10M Full-duplex or 10M Half-duplex.

ii. For the newest Tenda setup page, simply select WAN Speed and change the WAN speed to be 10M Full-duplex or 10M Half-duplex.

l  Reset the Tenda device to factory default

i.  In the setup page, simply select System Tools/Management/Tools from the main menu, and select  Restore to Factory Default/Restore to Default/Restore Default. You can reset the Tenda device to factory default there.

ii. Find a Reset or RST button/hole on the side of the Tenda device and hold down it for about 10 seconds. During which time, you will find that all the indicators turn on or off and several of them will back off or on later. All of the customized settings of the Tenda device will be erased after resetting. You can search the corresponding article from our website to set up your Tenda device again.

Note: For W150D/W300D, you may encounter a page of upgrading after resetting, and you can power cycle the W150D/W300D to solve the problem. You may need to proceed with the next part if you still cannot access the Internet.

Troubleshooting Internet connectivity issues when the connection status shows Connecting 

You can try any solutions below.

Verify your Internet connection type

Power cycle your modem and the Tenda device

Change the LAN IP address in the setup page

Clone the MAC address

Reset the Tenda device to factory default

l  Verify your Internet connection type.

If you have no idea, click here or contact your ISP (Internet Service Provider) for help.

l  Power cycle your modem and the Tenda device

Perform the power cycle process as below:

Step 1:

Unplug the power cable from your modem first, and then from your Tenda device.

Step 2:
Wait for about 30 seconds.

Step 3:

Plug the power cable back to your modem first, and then into your router.

Step 4:

Wait for the router and modem lights to light up, and then try to connect to the Internet.

l  Change the LAN IP address in the setup page

Follow the steps as below:

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select Advanced Settings again and then select LAN Settings from the submenu.

Note:

i. For dual band router like N60, you should select Network first and then select LAN.

ii. For the newest Tenda Interface, simply select LAN Settings.

Step 3:

Change the default LAN IP address to another one, leave the subnet mask as default and click Apply/OK/Save. For example, change the default 192.168.0.1 to 192.168.5.1.

l  Clone the MAC address

Follow the steps as below:

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select Advanced Settings again and then select MAC Clone from the submenu. Or directly select MAC Address Clone under Advanced Settings.

Note:

i. For dual band router like N60, you should select Network first, then select WAN Port, and then point to MAC Clone.

ii. For the newest Tenda setup page, simply select MAC Clone.

Step 3:

Click Clone MAC or Clone MAC Address, and click Apply/OK/Save.

l  Reset the Tenda device to factory default

i.  In the setup page, simply select System Tools/Management/Tools from the main menu, and select  Restore to Factory Default/Restore to Default/Restore Default. You can reset the Tenda device to factory default there.

ii. Find a Reset or RST button/hole on the side of the Tenda device and hold down it for about 10 seconds. During which time, you will find that all the indicators turn on or off and several of them will back off or on later. All of the customized settings of the Tenda device will be erased after resetting. You can search the corresponding article from our website to set up your Tenda device again.

Note: For W150D/W300D, you may encounter a page of upgrading after resetting, and you can power cycle the W150D/W300D to solve the problem. You may need to proceed with the next part if you still cannot access the Internet.

 

Troubleshooting Internet connectivity issues when the connection status shows Connected

You can try solutions as below.

Power cycle your modem and the Tenda device

Change the LAN IP address in the setup page

Clone the MAC address

Change the DNS Address

Change the MTU value

Change the WAN speed in setup page

Reset the Tenda device to factory default

Upgrade to a newer firmware

l  Power cycle your modem and the Tenda device

Perform the power cycle process as below:

Step 1:

Unplug the power cable from your modem first, and then from your Tenda device.

Step 2: 
       Wait for about 30 seconds.

Step 3:

Plug the power cable back to your modem first, and then into your router.

Step 4:

Wait for the router and modem lights to light up, and then try to connect to the Internet.

l  Change the DNS Address

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select DNS Settings under Advanced Settings. Tick the checkbox first to manually set the DNS, and then set the primary DNS Address to be 8.8.8.8.

Note:

i. For dual band router like N60, you should select Network first, and then select DHCP. Tick the check box, and you can set the Primary DNS Address to be 8.8.8.8 there.

ii. For the newest Tenda setup page, simply select DNS Settings, tick the checkbox, and you can set the Primary DNS Address to be 8.8.8.8 there.

l  Clone the MAC address

Follow the steps as below:

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select Advanced Settings again and then select MAC Clone from the submenu. Or directly select MAC Address Clone under Advanced Settings.

Note:

i. For dual band router like N60, you should select Network first, select WAN Port, point to MAC Clone.

ii. For the newest Tenda setup page, simply select MAC Clone.

Step 3:

Click Clone MAC or Clone MAC Address, and click Apply/OK/Save.

l  Change the MTU value

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select Advanced Settings again and then select WAN Settings from the submenu. Or directly select WAN Settings under Advanced Settings.

Note:

i. For dual band router like N60, you should select Network first, select WAN, click on Config under Edit in WAN Settings.

ii. For the newest Tenda setup page, simply select Internet Connection Setup.

Step 3:

Change the MTU value to be 1450 or 1400.

l  Change the LAN IP address in the setup page

Follow the steps as below:

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select Advanced Settings again and then select LAN Settings from the submenu.

Note: For dual band router like N60, you should select Network first and then select LAN.

For the newest Tenda Interface, simply select LAN Settings.

Step 3:

Change the default LAN IP address to another one, leave the subnet mask as default and click Apply/OK/Save. For example, change the default 192.168.0.1 to 192.168.5.1.

l  Change the WAN speed in the setup page

Step 1:

Click on Advanced Settings/Advanced directly after logging into the setup page.

Step 2:

Select Advanced Settings again and then select WAN Speed or select WAN Speed directly, and change the WAN speed to be 10M Full-duplex or 10M Half-duplex.

Note:

i. For dual band router like N60, you should select Network first, select WAN Port, point to Speed/Duplex. Change the WAN Interface-Speed/Duplex to be 10M Full-duplex or 10M Half-duplex.

ii. For the newest Tenda setup page, simply select WAN Speed, change the WAN speed to be 10M Full-duplex or 10M Half-duplex.

l  Reset the Tenda device to factory default

i.  In the setup page, simply select System Tools/Management/Tools from the main menu, and select  Restore to Factory Default/Restore to Default/Restore Default. You can reset the Tenda device to factory default there.

ii. Find a Reset or RST button/hole on the side of the Tenda device and hold down it for about 10 seconds. During which time, you will find that all the indicators turn on or off and several of them will back off or on later. All of the customized settings of the Tenda device will be erased after resetting. You can search the corresponding article from our website to set up your Tenda device again.

Note: For W150D/W300D, you may encounter a page of upgrading after resetting, and you can power cycle the W150D/W300D to solve the problem. 

l  Upgrade to a newer firmware

After you have tried all the above-mentioned solutions but in vain, you can try to upgrade the Tenda device’s firmware if any bugs exist.

 

Related articles:

How can I connect to a wireless network?

How to forget or remove a wireless network?

What if I cannot see the Tenda Wi-Fi signal?

What if I can see my Wi-Fi but cannot connect to it?

How to fix an unstable or slow wireless network?

How to fix an unstable or slow wired network?

 

 

Download this article: 

Trouble shooting on Internet connection problems

  

 

Rezolvat(5)
Nerezolvat(3)
  •  +86 755-2765 7180
  • support@tenda.cn
Rețelistică pentru locuințe
Sisteme mesh
Routere Wi-Fi
Routere 5G/4G cu Wi-Fi
Switch-uri, extendere Wi-Fi și Powerline
Adaptoare Wi-Fi pe PCIe și USB
Rețelistică pentru afaceri
Switch-uri și accesorii
Routere multi-WAN
Echipamente fibră optică
Puncte de acces Wi-Fi
Echipamente Wi-Fi pentru distanțe mari
Tenda CloudFi
Supraveghere video
Camere IP
NVR-uri
Kituri supraveghere video
Centrul de asistență
Suport tehnic
Toate echipamentele și serviciile oferite
Specificații tehnice
Descărcări
Întrebări frecvente
Materiale video de instruire
Emulatoare interfață gestionare
Ghiduri de instalare rapidă
Produse scoase din producție (EOL)
De unde să cumpărați
eMAG România
Altex România
Profil companie
Despre noi
Contactați-ne
Știri
Istoric
logo
  • Privacy Statement
  • Discontinuation Policy
       
Toate drepturile rezervate © 1999-2023 Shenzhen Tenda Technology Co.,Ltd.
 Romania / Română/ ro

Tenda Technology Tower, #1001 Int' l E-City Zhongshanyuan Road, Nanshan District, Shenzhen, R.P Chineză, cod poștal 518052