TEG1128P-24-250W _Tenda-All For Better NetWorking

TEG1128P-24-250W Download（4）
1TEG1128P-24-250W Installation Guide
2Tenda Lightning Protection Guide
3TEG1128P-24-250W Datasheet
4TEG1128P-24-250W HD Image

TEG1128P-24-250W 26GE+2SFP Ethernet Switch With 24-Port PoE

TEG1128P-24-250W is a gigabit Unmanaged Ethernet PoE switch designed by Tenda. The switch provides 24 gigabit PoE ports, 2 uplink gigabit RJ45 ports and 2 SFP ports. It supports the IEEE 802.3af/at standard and can automatically detect PDs and supply power. The maximum output power of a single port is 30W, and the power of the whole switch is 250W. It supports rack mounting, one-toggle settings, plug and play, and simple networking. It is an ideal choice for SMBs, hotels, schools, and parks with video surveillance and wireless networking requirements.

Explore

Network standards	IEEE 802.3/IEEE 802.3u/IEEE 802.3ab/IEEE 802.3x/ IEEE 802.3af/IEEE 802.3at
LED Indicator	Power Link/Act PoE MAX
Interfaces	(26)1GE RJ45 ports (2)1GE SFP ports
Transmission media	Recommended: CAT5/5e UTP or better
Level of protection	Port: 6 KV Power：6 KV
Forwarding mode	Store-and-forward
Switch capacity	56Gbps
Packet forwarding rate	41.7Mpps
Buffer	4Mb
MAC address table	8K
PoE budget	Single port: AF: 15.4W, AT: 30W Whole device: 230W
Power consumption	250W
Input voltage	100-240V AC，50 / 60Hz
Mounting	Rack mounting : support Desktop mounting: support Wall mounting: support
Environment	Operating Temperature: 0℃~45℃ Storage Temperature: -40℃~70℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
Certification	FCC, CE, RoHS
Funtions	One-key to change network mode: 1.Standard: All ports can communicate with each other. It can be used as a common non-management PoE switch. 2.Priority: Ports 1 to 8 are high-priority ports, which greatly reduce packet loss and congestion when the network is congested. 3.Extend: The maximum transmission distance of the 17-24 ports of the switch can reach 250 meters, and all ports can communicate with each other. 4.VLAN: Ports 1 to 24 cannot communicate with each other, but can communicate with ports 25, 26, SFP1 (27), and SFP2 (28), which can be used to isolate broadcast storms and DHCP conflicts.