TEF1118P-16-250W

TEF1118P-16-250W
 16FE+2GE/1SFP Rackmount Switch With 16-Port PoE

Dedicated for Surveillance & SMB networking

6KV lightning protection

GE&SFP uplink ports

Smart PoE Supply

4 modes

250W Power Supply

TEF1118P-16-250W
TEF1118P-16-250W

GE&SFP uplink ports ,Large Buffer of Nearly 3M

With one 10/100/1000 Mbps combo SFP slot, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance. Working with Tenda optical fiber module TEG311SM, the switch supports a maximum transmission distance up to 20km.

TEF1118P-16-250W

6KV Excellent Lightning Protection

The switch offers various safety and protection types, including 6 kV lightning protection, PSE short-circuit protection, PoE overload protection, surge current protection etc, and these greatly protect the switch from being damaged by thunderstorm. Besides, it supports wide voltage input, AC:100-240V~50/60Hz.

TEF1118P-16-250W

Cascading with 6 Devices
Can Support IP Surveillance Project of up to 96 Cameras

In the number of about 100 terminals accessed to the network, cascading 6 devices through the G1、G2/SFP2 can achieve up to 96-channel monitoring, according to the project , it supports 300W/500W IPCaccessed and ensure stable video transmission withoutbreaking up.If the both ends of devices are connected to the NVR, the video can be watched locally.

TEF1118P-16-250W

4 Modes for Different Networks

Standard mode, Port-based Priority mode, Port-based VLAN mode and Extend mode make TEF1118P-16-250W be able to deal with different networks,special for small & Medium-sized IP surveillance & WI-FI coverage project.

TEF1118P-16-250W

Mode 1 : Standard Mode

This is the default working mode of TEF1118P-16-250W. In the mode, all ports can communicate with each other independently.

TEF1118P-16-250W

Mode 2: Port-based Priority Mode

In this mode, ports 1 to 8 have higher priority than other ports, and all ports can communicate with each other. When the switch is connected to multiple IP cameras, you are recommended to use this mode for better smooth transmission with the key IP cameras connected to higher priority ports, and connect the 2 uplink ports (G1,G2/SFP2) to uplink devices (such as NVR or Router).

TEF1118P-16-250W

Mode 3:Port-Based VLAN Mode

In this mode, ports 1 to 16 can communicate with uplink ports (G1,G2/SFP2) , but can’t communicate with each other. You can use this mode to isolate broadcaststorm and prevent ARP virus and DHCP sproofing.

TEF1118P-16-250W

Mode 4: Extend Mode

Due to the complex monitoring environment, the distance from each terminal to the monitoring center is different, some even more than hundred meters. TEF1118P-16-250W can support 250 meters data transmission in the Extend mode, which can save the cost of your project with less devices used.

TEF1118P-16-250W

More Function

Tenda

Smart Power Management

Tenda

Rotating brackets design

Tenda

19”Rackmount Design

Tenda

Plug & Play