W6-S - How to configure Network settings


1.   Click on “Network”, double click “LAN Setup” to set up the IP Address Type in Static or Dynamic.
 
 
 
Note: Remember to “Save” the configuration.
 
2.   Click on “DHCP Server” and Enable the option of “Enable” to set up a Server for your own.
 
 
Note: Remember to “Save” the configuration.
 
3.   Click on “DHCP Server” to set the “Lease Time”.
 
 
Note: Remember to “Save” the configuration.
 

Was this article helpful to you?

Very Good(0)Article Views(254)