F456-How to setup the router for PPPOE internet connection mode

How to setup the router for PPPOE internet connection mode

Model number: F456

There are three internet connection modes for the router. This article will guide you how to

setup the router for PPPOE mode and the steps as below.

Note: if you have no idea about the internet connection type and the accounts please call

your ISP for help.

Part 1: Connect the devices

Part 2: Configure your computer

Part 3: Setup the router

Part 4: Check whether you can access internet

Connect the modem with the WAN port of the router, and then connect your computer with

one of the LAN ports of the router by a cable.

说明: 1.jpg

Note: After connection the SYS light should be blinking, the WLAN light should be on or

blinking, the WAN light should be on or blinking.

1 Click Network Connection Icon on the system tray, then click Open Network and

Sharing Center. (Here is for windows 7, other operating system please click HERE.)

说明: Icon.tif

2 Click on Change adapter settings.

说明: Change.tif

3 Right click Local Area Connection, then choose Properties option.

说明: local.tif

4 Double click on Internet Protocol Version 4(TCP/IPv4)

说明: IPV4.tif

5 Choose Obtain an IP address automatically and Obtain DNS server address

automatically and then click OK.

说明: IP.tif

6 Also click OK on the first Local Connection Properties window

说明: ok1.tif

1 Open a browser then type 192.168.0.1 in the Address bar, click Enter.

说明: browser.tif

Note: if you cannot login the home page, please click HERE.

2 Fill in admin both in the User Name and Password fields, click Login.

说明: Username & password.tif

3 A gray window will appear, do not note it, and just click OK.

说明: OK.tif

3 Choose the PPPOE option, then type the ISP Username and ISP Password in the correct

bars, then set a 2.4G Security as you want, click on Save to save the settings, then click

Advanced to login the advanced setting page.

说明: PPPOE.tif

Note: the 2.4G Security should be at least 8 characters.

4 Click on Tools, then click on Reboot, and then press the Reboot button to reboot the

router for refreshing the device info.

说明: Reboot.tif

Type the User Name and Password as admin then Click on Advanced to login the advances

setting page, and then check on the Status if the WAN Status shows Connected that means

you can access internet, please check.

说明: PPPOE status.tif

Was this article helpful to you?

Very Good(0)Article Views(1227)