FAQ

N301-How to setup MAC Address Filter

Note: This article will guide you how to MAC Address Filter and the steps as below.
 
Step 1: Connect your computer to the LAN port of N301, and then  power on the N301.
 
说明: 1
 
You can also use your smartphone to configure the router.
 
说明: 2
 
Step 2: Open a Web Browser -> Type 192.168.0.1 in the address bar -> Press Enter
 
 
Step 3: Go to Advanced -> MAC Address Filter, and then you can select the filter mode.
 
说明: 1
 
Step 4: Type MAC Address that you want to filter in “MAC Address” bar, and then click the “+” to apply it, and then click “OK” to save these settings.
 
说明: 2
 
 
 
11Very Good 1568Article Views