FAQ

How to Login Management Interface of W900A?

How to Login Management Interface of W900A

 

Step 1: Power on the AP, and connect PC to AP’s LAN port by a cable (as the following illustration);

 

Step 2: Set a static IP for local area connection within the following range: 192.168.0.X (2-254), and with the subnet mask: 255.255.255.0;

 

Step3: Launch the browser and login AP’s web page;

   Launch IE browser and input 192.168.0.254 in the address bar and press Enter;

   Type in the default username and password (admin for both) and click Login;

   Enter this device’s web page.

 

The above steps show how to login Management Interface of W900A, if you cannot login, please contact our customer service. The email address is support@tenda.com.cn, thank you!

0Very Good 491Article Views