D301-How to setup DSL link type-IPoE

How to setup the modem router for PPPoE internet connection mode

Product line: Wireless    Model number:D301

This article will guide you how to setup the router for PPPoE mode and the steps as below.

Note: If you have no idea about what is the internet connection type, VPI/VCI value, the accounts please call your ISP for them.

Part 1:Connect the devices

Part 2:Configure your computer

Part 3:Setup the router

Part 4:Check whether you can access internet

Connect the DSL line with the DSL port of the router, and then connect your computer with one of the LAN ports by a cable.

Note: after connection the SYS light should be blinking, the WLAN light should be on or blinking, the DSL light should be on or blinking.

 

1 Click on Network Connection Icon on the system bar, then click on Open Network and Sharing Center.(Here is for win7, other computer please clickHERE.)

说明: 无线信号.png

2 Click on Change adapter settings.

说明: change.png

3 Right click on Local Area Connection, then choose thePropertiesoption.

说明: local.png

4 Double click on Internet Protocol Version 4(TCP/IPv4)

说明: IP4.png

5 Choose Obtain an IP address automatically andObtainDNS server address automatically and then click OK.

说明: obtain IP.png

6 Also click onOK on the first Local Connection Properties window.

说明: OK.png

1Open a browser then type192.168.1.1 in the Address bar, click on Enter.

Note: if you cannot login the management page, please click HERE.

2 Type the Username and Password as admin in the bars then click on Login to login the setting page of the ro0uter.

3 Click Advanced—Advanced Setup-Layer2 interface- ATM interface, click Add. Then type the VPI/VCI which given by your ISP, click Apply/save.

4 click WAN service-Add-Next, then choose IP over Ethernet, click Next. Then choose Obtain IP address automatically or Use the following static ip address. Click Next- Next- Next- Next-Apply/save.

NOTE: if you choose Use the following static ip address,  you need to type in the IP address you get from your ISP. 

1 Click on Advanced to login the advanced setting page, then check the Device Infoif the Status shows Connected that means you can access internet, please check.

 

Was this article helpful to you?

Very Good(7)Article Views(3904)