N150-How to setup the router for DHCP internet connection mode

How to setup the router for DHCP internet connection mode?

Model number: N150

There are five internet connection modes for the router. This article will guide you how to

setup the router for DHCP mode and the steps as below.

Part 1:Connect the devices

Part 2:Configure your computer

Part 3:Setup the router

Part 4:Check whether you can access internet

Connect the modem with the WAN port of the router, then connect your computer with one

of the LAN ports of the router by a cable.

说明: 7

Attention: After connection the SYS light should be blinking, the WLAN light should be on or

blinking, the WAN light should be on or blinking.

Open Network and Sharing Center. (Here is for windows 7, other operating system please

click HERE.)

1 Click on Network Connection Icon on the system bar, then click on Open Network and

Sharing Center.

说明: 无线信号.png

2 Click on Change adapter settings.

说明: change.png

3 Right click on Local Area Connection, then choose Properties option.

说明: local.png

4 Double click on Internet Protocol Version 4(TCP/IPv4)

说明: IP4.png

5 Choose Obtain an IP and DNS server address automatically and then click OK.

说明: obtain IP.png

6 Also click onOK on the first Local Connection Properties window

说明: OK.png

1Open a browser then type 192.168.0.1 in the Address bars, click Enter.

说明: C:\Users\Jane Lee\Desktop\N301做FAQ\browser.PNG

Note: If you cannot login the management page, please click HERE.

2Choose the DHCP option, set a Security Key, click on OK, then click on Advanced.

说明: DHCP.png

3Click on Tools, click on Reboot, then press the Reboot The Router button to reboot the

router for refreshing the device info.

说明: reboot.png

Click on Advanced then check the Status if the Status shows Connected that means

you can access internet, please check.

说明: status.png

Bu makale size yardımcı oldu mu?

Çok Güzel(1)Makale Görünümleri(2774)