How to login management interface of W6 ?
Product line: AP Model number: W6
This article will guide you how to login management interface of W6 and the steps as below.
Part 2: Configure your computer
Part 3: Login management interface
Part 4: Setup wireless access control
1.Power on the AP, and connect your PC to one of the LAN ports by a cable, as the following illustration;
2. Click on Change adapter settings.
3. Right click on Local Area Connection, then choose the Properties option.
4. Double click on Internet Protocol Version 4(TCP/IPv4).
6. Also click on OK on the first Local Connection Properties window.
1. Launch IE browser, input 192.168.0.254 in the address bar and press Enter;
2.Type in the default username and password( admin for both) and click Login;
3.Then enter this device’s web page;
1. Click Wireless item then choose Access Control and then setup wireless access control according to the screenshot.
Mac Address Filter: Select Allow or Deny from the drop-down list.
2. Now, you have already setup the Access Control, but you cannot access to the Internet without permitted MAC. If you have any problem, please contact our customer service, the email address is firstname.lastname@example.org, thank you.
0It's very good 37Article Views