UG1 - How to install the hardware

Model number: UG1

This article will guide you how to install the hardware.

Part 1: Open the case of the computer

Part 2: Plug the Ethernet interface card

Part 3: Tight the screws

Part 4: Connect to the Internet

 

1.   Disconnect your PC from power supply and open the case.

2.   Plug the Ethernet interface card into the PCI-E.

3.   Fix the Ethernet interface card by tightening the screws on the case.

4.   Use Ethernet cable to connect to Internet.

UG1 - How to install the hardware

0It's very good 23Article Views