Product
line: Wireless Model number: F3
There are three
internet connection modes for the router. This article will guide you how to
setup the router for Static IP mode and the steps as below.
Note: If you
have no idea about what is the internet connection type and the accounts please
call your ISP for them.
Part 1: Connect the devices
Part 2: Configure
your computer
Part 3: Setup
the router
Part 4: Check whether you can access
internet
Connect
the Ethernet cable with the WAN port of the router, and then connect
your computer with one of the LAN ports by a cable.
Note: after connection the SYS light should be blinking, the WLAN light should be on or blinking, the WAN light should be on or blinking.
1 Click
on Network Connection Icon on the system bar, then click on Open
Network and Sharing Center.
2 Click
on Change adapter settings.
3
Right click
on Local Area Connection, then choose the Properties option.
4
Double click
on Internet Protocol Version 4(TCP/IPv4)
5 Choose Obtain an IP address automatically and Obtain DNS server address
automatically and then click OK.
6 Also
click on OK on the first Local Connection Properties window.
1 Open a browser then type 192.168.0.1 in the Address bar, click on Enter.
2 Type the Password as admin in the bars then click
on Login to login the setting page of the router.
2 Set a 2.4G Security for the wireless security, click
on Save to save the setting, and click on Advanced on the right of
the page to login the advanced setting page.
Note: the 2.4G Security should be at least 8 characters.
3 Click on the Advanced then click on the Internet
connection setup option on the left of the page, then open the Dropdown
Menu of the Connection Type then choose the Static IP option,
after that type the accounts that provided by your ISP then click on OK to save the settings.
Note: type the Secondary DNS Server as 8.8.8.8 if your
ISP does not provide it.
4 After setting, please click on Tools, and click on Reboot then hit on the Reboot the router button to reboot the router for refreshing
the device info.
1 Click on Advanced to login the advanced setting page, then
check the WAN Status if the Connection Status shows Connected that means you can access internet, please check.
NOTE:
1,When the Connection
Status show Disconnect, it means that there are some problem with
the WAN Connection. please check hardware connection.
2, When the Connection Status Show Connecting, please try the steps as below
a, click AdvancedàMAC CloneàClone MAC Address to clone your computer’s mac address to the router’s WAN port, then click Save to save the setting and click Reboot.
b, click AdvancedàLAN SettingsàIP address, change
it to 192.168.5.1, click Save to save the setting and the router will
reboot automatically.
C, if
the Connection Status is still Connecting, please reboot the
modem and router together.
