How to extend your wireless network by button
Model number: AH302
By pressing the EXTENDER button, you can achieve wireless bridging for extending wireless
network without complicated procedures. This feature will only be effective in range extender
mode. Steps are as follow. Before setting AH302, please sure that you can get internet if you
connect your computer to upper router directly.
1 Press the WPS or QSS button on your wireless router for 1~3 seconds, its WPS light
should be blinking.
2 Press the EXTENDER button on the wireless range extender for 1~3 seconds.
3 When the Range Extender LED light 
is solid on, the wireless range extender will be
connected to your desired router successfully. You can also login to the web management
interface to check bridge status.
Note: If the wireless range extender is connected to the remote router within 20 seconds,
the wireless range extender’s DHCP server will be disabled automatically. Thus, the wireless
range extender will get the IP assigned from the remote router and then you can access to
the Internet. We can still login its homepage with”tendaextender.net”
How to set range extender mode via management page? Click here.
