How to setup the Travel Router for Static IP internet connection mode

 How to setup the tenda Travel Router for Static IP internet  connection mode?

       Product line: Wireless   Question category: Internet setup

Step1 Connect the devices

Step2 Configure your computerGenerally you can skip this step if you can do step3 successfully)

Step3 Setup the router

Step4 Check whether you can access internet

 

Connect your modem to A5, then use your laptop to find the wireless signal of A5 (Tenda_XX the last characters of MAC address of A5) without password or with the default password 12345678

 

 

 

 

 

1.Open a browser or safari, then input 192.168.0.1 in the address bar, click Enter, then input the default login password “admin” ,click OK to login to the homepage, then  Advanced Settings.

                                 Not sure your Connection Type, please click this link

                                   If you can’t login to this page, please click this link

 

2.Click on Wan Setting,then choose static ip and input the information that given by your ISP.

 

If the connection status shows Connected, it means that you can have internet.Please check.

                                                   If you can’t access internet, click this link.

                                                  Wireless settings, please click this link

  • Категория документа : Internet Setup
  • Сопутствующие товары :

Была ли эта статья полезна?

Отлично!(0)Просмотры статьи(4638)