How to configure the AP Mode for the portable router

 

截图00.pngHow to configure AP Mode for the portable router?

 

Product line: Wireless     Question category: function configurations

QWhen we need to configure the router as AP Mode?

AThis portable router worked as a converter between the wired and wireless signal with AP mode. If you already have wired router and want to connect to the Internet wirelessly on laptops, Connect this portable router to the wired router’s LAN port with Ethernet cable, then all the wireless clients can access the Internet wirelessly.

 

 Common network connection topology is as follows.

 

       

 

 

 

Steps are as follows:

 

1.   Connect your computer to the port of the portable router with an Ethernet cable.

 

2.   Login to the management page of this router (The login IP is default to be 192.168.2.1; the username and password are both admin).

            How to login to the management page?

3.   In the management page, choose the default mode Wireless AP->Setup Wizard. In the set up Wizard page, click next.

截图01.jpg

 

4.   In the Wireless Basic Setting page, you can do the basic configuration for your router. You can change the name of your router by changing the SSID and choose the wireless Channel. Click Next.

 

截图02.jpg

 

5In the Wireless Security Settings page, please choose WPA-Personal as Security Mode and choose AES as WPA Algorithms. And type password for wireless network in the blank of Pass Phrase. Click Next. 截图03.jpg

 

6Click Apply to save the Settings.

 

截图04.jpg

 

7Connect this router to your wired router’s LAN port with Ethernet cable, and the computer connect to this router wirelessly will get the ip address from uplink router and connect to the internet normally.

 

 

 

 

  • Категория документа : Function Config
  • Сопутствующие товары : W300M

Была ли эта статья полезна?

Отлично!(0)Просмотры статьи(2626)