How to setup the Wireless Adapter?
Product line:
Wireless Question
category: Wireless settings
The Steps are as
below:
1. Insert
the wireless adapter in the USB port of your computer;
2. Check
whether the adapter is recognized or not: Right click on Computer,
and select Manage, and then double click device manager.
On the right menu, please click Network adapters, if it have an
option of “802.11n USB wireless LAN card”, that means the
adapter is recognized by your computer; if under Network adapter, it doesn’t
have the option of “802.11n USB wireless LAN card”, it means the adapter
is not recognized, please change another USB port to insert it.
3. After
the adapter is recognized by your computer, please put the included software CD
into the CD driver of your computer. The driver will run automatically, and a
welcome page will pop up, just click on “RUN” button (double
click on “Tenda.exe” in the software CD and manually install if
it is not auto-run).
4. Select “I
accept the terms of the license agreement ” and click on Next.
5. Select “Install
driver only”. And then click Next.
6. Click “Install”
to begin the driver installation.
7. Click “Finish”
to complete the installation.
8.After
restarting the computer, you can go to your “wireless network connection” to find your wireless signal and connect to it and then enjoy your internet.
Tips
for how to find the wireless signal
A.
windows xp
Start—Control
panel---network connections--- (right click on) wireless network
connection----view available network----your own wireless signal
B.
windows
Start
---control panel----network and internet---network and sharing center---change
adapter settings--- (right click on) wireless network connection----connect/disconnect----your
own wireless signal
C.
windows vista
Start
--- control panel---network and internet----network and sharing center----mange
network connection--- (right click on) wireless network connection---
connect/disconnect---your own wireless signal
B.If you
have installed the driver with “Tenda WLAN utility” and cannot find your own
signal on it, you can reinstall the driver as following steps:
1.
Please put the included software CD into the CD driver of your computer again.
The driver will run automatically, and a welcome page will pop up, just click
on “RUN” button (double click on “Tenda. exe” in
the software CD and manually install if it is not auto-run).
2.
Select “Remove current driver”, and then click “yes” to finish
remove the old driver
After it
finishes removing, please
click on finish, then
it will turn to the welcome page, then please refer
to A to install the driver again and connect to your wireless signal.
How to setup the Wireless Adapter
